PC-700HT is a fast-set, high performance, spray- applied, plural component, 100% pure polyurea elastomer with high tensile strength. This system is based on amine-terminated polyether resins, amine chain extenders, and prepolymers. It provides a cost effective flexible, tough, resilient monolithic membrane with water and chemical resistance.
Physical Properties
| Mix Ratio by Volume | 1:1 |
| Gel Time (Seconds) | 5-7 |
| Tack-Free Time (Seconds) | <15 |
| VOC Content | 0 |
| Solids Content | 100 |
| Shore D Hardness, ASTM D2240 | 46±5 |
| Shore A Hardness, ASTM D2240 | 93±3 |
| Elongation %, ASTM D638, Type IV | 400±100 |
| Tensile Strength (psi), ASTM D638, Type IV | 4150±300 |
| Tear Strength (lb./in.), ASTM D624, Die C | 450±100 |
Taber Abrasion, ASTM D4060 (CS-17 Wheel, 1000 Cycles) | 15 |
The values stated in this technical data sheet are produced under controlled laboratory conditions.
