PC-842AL
Aliphatic

PC-842AL is a-100% solids, flexible, two component modified aliphatic elastomer spray applied coating material. PC-842AL is autocatalytic, containing no solvents, hardeners, or diluents. PC-842AL is used by itself or in combination with other materials to produce coatings and liners on concrete or metal substrates. Its composition makes it suitable for applications requiring color stability. PC-842AL produces an extremely tough film at any thickness. PC-842AL may be applied in all positions to any suitably prepared substrate.

PC-842AL is a superior coating material designed specifically for industrial and commercial applications receiving constant or intermittent exposure to ultraviolet light. PC-842AL is flexible, accommodating movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations. With or without reinforcements PC-842AL may be used in transitional areas with confidence. PC-842AL may be used in interior or exterior applications.

Physical Properties

Mix Ratio by Volume

1:1

Gel Time (Seconds)

30-35

VOC Content

0

Solids Content

100

Shore D Hardness, ASTM D2240

60-70

Elongation, ASTM D638, Type IV

>80

Tensile Strength (PSI), ASTM D638, Type IV

2176-2756

Tear Strength (lb./in.), ASTM D624, Die C

485 – 542

Taber Abrasion, ASTM D4060

(CS-17 Wheel, 1000 Cycles)

75 – 85

The values stated in this technical data sheet are produced under controlled laboratory conditions.

PC-842AL